Aluminum sheets & coils are manufacturers, supplied and exported in abundance in India. Hot rolling & cold rolling methods are used to produce rolled products in sheets, plates and coil form.

» Cold Rolled Coils
Following specifications are required for the Aluminum Coils :

Thickness (in mm)	Standard width (in mm)	Arbour dia (in mm)	Coil Density	Temper	Alloys
0.3-2.0	915, 1220 & 1500	200, 300 & 500	1-2 kg/mm width	M, O, H1, H2, H3 & H4 with trimmed edges	Non-heat treatable alloys
0.3-2.0	915, 1220 & 1500	200, 300 & 500	1-2 kg/mm width	M & O with trimmed edges	Heat treatable alloys

» Cold Rolled Sheets
Following specifications are required for the Aluminum Sheets :

Thickness (in mm)	Standard width (in mm)	Standard Length (in mm)	Temper	Alloys
0.7-4.0	915, 1220 & 1500	2440	M, O, H1, H2, H3 & H4 with trimmed edges	Non-heat treatable alloys
0.7-4.0	915, 1220 & 1500	2440	M & O with trimmed edges	Heat treatable alloys

» Hot Rolled Coils
Following specifications are required for the availability of Hot rolled coils in trimmed conditions :

Thickness (in mm)	Standard width (in mm)	Arbour dia (in mm)	Approx. coil wt. (in kgs.)	Temper	Alloy	Coil density kg/mm width (approx.)
4-12	915, 1220 & 1500	750	100-3000	M & O	Al Al-Mn Al-Si-Fe	2.25
5-8	915, 1220 &1500	750	100-3000	M & O	Al-Mg Al-Mg-Si Al-Cu-Mg	2.25

» Hot Rolled Plates
Following specifications are required for the availability of Hot rolled plates in trimmed conditions :

Thickness (in mm)	Standard width (in mm)	Length (in mm)	Temper	Alloy
5-12	915, 1220 &1500	2000-8500	M & O	Al, Al-Mn & Al-Si
5-8	915, 1220 &1500	2000-8500	M & O	Al-Mg, Al-Mg-Si &Al-Cu-Mg
12.1 - 100	915, 1220 &1500	2000-6000	M & O	Al, Al-Mn & Al-Si
8.1-100	915, 1220 &1500	2000-6000	M & O	Al-Mg, Al-Mg-Si & Al-Cu-Mg